Water Softener

How Water Softening System Makes Your Family Healthier

Many homeowners usually think tap water is safe to wash in, to cook with, and to drink directly from the faucet. However, this isn’t always the case. The water that flows out of your tap can be hard and contaminated.

However, you can connect a home water softening system to clean up your tap water to remain healthy. A Water Softener Service can help you install the system.

Take a look at how the water softening system can make your family healthier.

It Softens The Hard Water

If you notice the water you use is constantly leaving a white flaky residue if your clothes become stiff after you wash them, and if you’ve been breaking out more often than usual, you are most likely using hard water.

That flaky residue indicates too much magnesium and calcium in the water and it gets into your pores too apart from your clothes. A water softener uses a combination of salt and special beads that can help pull all the pesky minerals out of your water, making the soap more effective, allowing your clothes to get clean, and also significantly improving the hair and skin health.

It Clears Iron From The Water

If your water runs orange, yellow, or a deep and murky red, it is a sign of an unpleasant concentration of iron in your tap water. Iron is one of the most common and undesirable contaminants which are a result of either iron seeping down from iron-rich soil or old rusting iron pipes. The iron-filled tap water can lead to icky red staining in your toilet and sinks and turn anything you cook dark and bitter. When you install a water filtration system, the iron can easily be filtered. You can drink and use clear, delicious water.

It Removes Chlorine

Water that is rich in chlorine can give off nasty fumes, burn your eyes, cause health problems, and can also pose a cancer risk in the long-term. You can filter the chlorine out with the help of a water filter system easily.

Call Mitch Clemmons Plumbing Today For Water Softener Service

At Mitch Clemmons Plumbing, we have a team of experienced plumbers who can help install, maintain or repair any kind of water filtration system. We care for the wellbeing of our community and work toward providing your family with a healthy lifestyle. We serve families in Fullerton and La Habra and many families recommend us as the best Water Softener Service. Make a call at (562) 247-4994 today for Water Softeners Service.

water softener diagram

Tips for Water Softener Installation and Maintenance

You can make proper use of a water softener only when it is installed and maintained correctly. In this post can learn the key elements of both water softener installation and maintenance.

In case you are wondering what purpose a water softener serves, it is a piece of equipment that performs the task of softening the hard water. It can replace minerals including calcium and magnesium with the sodium ions. Note that the job is best done by a Water Softer Service.

Tips for Water Softener Installation

  • The basic tools you will need include a drill, glue, and clamps. They will make the drilling, joinery, and fitting of parts be more precise.
  • Locate the right placement. It is good to place the water softener near your plumbing area. Other viable options can be your garage, basement area, and utility rooms to avoid any disturbance with the function. Check the location temperature. It should not be freezing nor scorching. Also, never install it outdoors to avoid damage.
  • For external hook-ups, you will need a drain-floor or a similar utility that can work as a sink. You should also have an electrical receptacle, the one that doesn’t depend on the switch.
  • Make sure the end of the softener’s drain line is above the grate of the drain. It will prevent the malfunction of the water softener.

Tips for Water Softener Maintenance

  • Use pure salt with iron remover. Rock salt can cause the injector and the softener’s control valve to clog as it builds sediment in the brine tank.
  • Using pure salt is a cost-effective option. Iron remover can maximize your softener maintenance. Using it once a year will aid you to maintain a clean resin bed and parts of the control valve for a cleaner water softener.
  • Ensure that almost all of the salt in the tank is used up before refilling it. Refill no more than two-thirds full.
  • Pure salt also contains contaminants. You should clean the brine tank at least once a year to avoid contamination in your water.

Hire Experienced Water Softener Service

You don’t have to put your property at risk by installing or maintaining your water softener yourself. Get the help of Mitch Clemmons Plumbing for precise plumbing installation and maintenance. Or if you already have a water softener installed at home that is not functioning well, our efficient and experienced team can check to see if it can be repaired. Give us a call 562-362-3218,